Ask Lemmy
A Fediverse community for open-ended, thought provoking questions
Rules: (interactive)
1) Be nice and; have fun
Doxxing, trolling, sealioning, racism, and toxicity are not welcomed in AskLemmy. Remember what your mother said: if you can't say something nice, don't say anything at all. In addition, the site-wide Lemmy.world terms of service also apply here. Please familiarize yourself with them
2) All posts must end with a '?'
This is sort of like Jeopardy. Please phrase all post titles in the form of a proper question ending with ?
3) No spam
Please do not flood the community with nonsense. Actual suspected spammers will be banned on site. No astroturfing.
4) NSFW is okay, within reason
Just remember to tag posts with either a content warning or a [NSFW] tag. Overtly sexual posts are not allowed, please direct them to either [email protected] or [email protected].
NSFW comments should be restricted to posts tagged [NSFW].
5) This is not a support community.
It is not a place for 'how do I?', type questions.
If you have any questions regarding the site itself or would like to report a community, please direct them to Lemmy.world Support or email [email protected]. For other questions check our partnered communities list, or use the search function.
6) No US Politics.
Please don't post about current US Politics. If you need to do this, try [email protected] or [email protected]
Reminder: The terms of service apply here too.
Partnered Communities:
Logo design credit goes to: tubbadu
view the rest of the comments
There are plenty of guides but I just took it step by step. The links I provided have instructions for each bit of software needed. You'll need to be able to do things like flash the OS to a SD or USB drive and then be able to ssh into the Pi to install the camera software. Start here: https://www.raspberrypi.com/software/
There's no programming skill needed but you should be comfortable with using the terminal, or at least be willing to learn. You don't need to install a OS with a desktop, everything is done via the terminal.
After that's done you can use VLC to view the feed and check it's working before installing motioneye on a server. You just get the IP address of the camera and give the URL to VLC like this: rtsp://xxx.xxx.xxx.xxx:8554/h264
If you look at the whole thing in one go, it's overwhelming, but if you break it into chunks it's not too bad and it's a good learning opportunity, if that's your thing.
This is very encouraging and helpful, I will try to keep it in mind! Do I just go in the order of the links you posted in the previous reply?
Also just to make sure I understand correctly - at the end of it I should have a camera setup that I can access, via VLC, from the device of my choosing over ethernet/intranet?
Thanks again for taking the time to talk me through this.
Yes. Get a working camera feed and go from there. For that, tackle the hardware side first - Pi, camera, power/ethernet, case, storage for the OS. Then install the OS and the camera software and test it. Mine are all indoors so you'll have to see what kind of cases are weatherproof if you're using it outside.
Exactly. VLC will be fine if you only want to view one camera. If you want to add more, do recording/motion detection, view them in a browser, etc. then MotionEye on a server works but there are other options. I know that the Synology NAS' DSM OS has its own solution for managing all that stuff.
Great, thank you so much! I'm going to do my best to actually get it done this time, I'm already much closer to figuring it out than I've been before.