gerdesj

Start the linuxa or alinux project and off you trot. Find a better name than I did here and you'll be fine.

You

I'm not feeling too genocidal at the moment and I'm not too sure what a big blob of capitalism looks like but it sounds like you are impugning me (int al) in some way.

If you are going to deliver a stinging attack on something you dislike, why not deploy an impassioned and pithy argument rather than ... that. You do at least manage to spell it's correctly, which is nice.

What on earth went wrong?

Arch is just as safe as any other distro, sometimes more so. Being a rolling jobbie, smaller bits tend to break at a time. If you want to live life on the edge then Gentoo is your man but even Gentoo is becoming pretty safe. You might lose your windowing system for a while but you still have links2 to get to a search engine.

♬rope and pull and brand 'em ♬

"Every subsystem is a private fiefdom, subject to the whims of each one of Linux’s 1,700+ maintainers, almost all of whom have a dog in this race. It’s herding cats"

There are three similes in that quote. When your considerations are that disorganized, you have not finished thinking everything through. Fiefdoms, dogs and cats ... oh my! That's on top of wild west and other trite, well worn and rather silly similes.

Make your argument without recourse to inflammatory terminology and similes and you slighten the risk of pissing people off.

Clarity is in the eye of the beholder or as someone once said: "You do you".

I like to use my enterprise number and a UUID (all in lower case, for legibility). Here's an example:

.1.3.6.1.4.1.33230.0d456e46-67e6-11ef-9c92-7b175b3ab1f1

Now you might say that the UUID is already globally unique or at least pretty unlikely to turn up anywhere else, so why bother prefixing it with more stuff? To that I say: "I need to be absolutely or at least reasonably sure ... OK nearly sure".

Anyway, you maintain a database of these things and then attach documentation and meaning to them. An editor could abstract and hide that away.

I started this post as a joke. Not sure anymore. Why get your knickers in a twist with naming conventions for variables and constants. Programming is already a whopping layer of abstraction from what the logic gates are up to, another one wont hurt!

If you just run perl it will sit waiting for input. Try perl --version

Windows GPOs are a right old mess. I've been managing them for over two decades. The first fuck up is the word "Group". You cannot assign Group Policy Objects to AD groups unless you use something like ZENworks or some funky WMI filters!

Settings are applied to computers or users. Many settings are available to be set for both but only make sense or even work for one or the other. MS bought out some solution providers and that's why you get the Control Panel and other handy stuff, rather roughly bolted on.

AD with GPOs with the extension to "local machines" is a great idea but dreadful in execution. MS didn't want to nobble third party apps in the past so that's why we have this nonsense. Now its all about Azure/whatevs ie MS's cloud and subscriptions.

Now you belong us!

Linux being a Unix has NIS(+) for a directory or LDAP or AD or anything else you fancy. Ansible works for all mainstream OSs, including Windows.

So often I see people confusing and conflating authentication and authorisation, machine and session state configuration databases.

There are so many options it is almost impossible to know where to start!

Which distro is the VM running (is it even Linux)?

If you want the VM to use the host's VPN then you will need some routing and perhaps NAT/masquerade. This is non trivial to sort out. Can the VM have its own VPN connection to your supplier?

You are starting to reach the point where VLANs/subnets and separate routers (real or VM) may be required. Depending what you use as your ISP router, we might be able to get a solution together - so what model is it and do you have any switches?

Lemmy is quite good at not being too "tribal". Why not embrace a message as expressed, instead of worrying about where it is ... posted?

For me, one of the worst issues affecting t'internets is tribalism. Us humans are hardwired to go all in on tribal affiliation. It is generally harder to find inclusive measures than it is to find exclusive measures.

If you are here then you may not be exclusively: Firefox user ⊆browser user ⊆human. Note that browser user can have multiple browsers.

Please do a little research before trying random stuff. After checking to see if you are actually using the iwlwifi module, why not find out a bit about whether the mentioned param. is available to you and what it does:

Am I using the module. If the output from this is blank, then no:

$ lsmod | grep iwlwifi
iwlwifi               622592  1 iwlmvm
cfg80211             1331200  3 iwlmvm,iwlwifi,mac80211

Also verify with lspci -k as above:

$ lspci -k | grep iwlwifi -A2 -B2
        DeviceName: WLAN
        Subsystem: Intel Corporation Raptor Lake PCH CNVi WiFi
        Kernel driver in use: iwlwifi
        Kernel modules: iwlwifi
00:15.0 Serial bus controller: Intel Corporation Alder Lake PCH Serial IO I2C Controller #0 (rev 01)
        Subsystem: Hewlett-Packard Company Alder Lake PCH Serial IO I2C Controller

# modinfo iwlwifi
   ...
parm:           swcrypto:using crypto in software (default 0 [hardware]) (int)
parm:           11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint)
parm:           amsdu_size:amsdu size 0: 12K for multi Rx queue devices, 2K for AX210 devices, 4K for other devices 1:4K 2:8K 3:12K (16K buffers) 4: 2K (default 0) (int)
parm:           fw_restart:restart firmware in case of error (default true) (bool)
parm:           nvm_file:NVM file name (charp)
parm:           uapsd_disable:disable U-APSD functionality bitmap 1: BSS 2: P2P Client (default: 3) (uint)
parm:           enable_ini:0:disable, 1-15:FW_DBG_PRESET Values, 16:enabled without preset value defined,Debug INI TLV FW debug infrastructure (default: 16) (uint)
parm:           bt_coex_active:enable wifi/bt co-exist (default: enable) (bool)
parm:           led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int)
parm:           power_save:enable WiFi power management (default: disable) (bool)
parm:           power_level:default power save level (range from 1 - 5, default: 1) (int)
parm:           disable_11ac:Disable VHT capabilities (default: false) (bool)
parm:           remove_when_gone:Remove dev from PCIe bus if it is deemed inaccessible (default: false) (bool)
parm:           disable_11ax:Disable HE capabilities (default: false) (bool)
parm:           disable_11be:Disable EHT capabilities (default: false) (bool)

sysfs is a pseudo filesystem with lots of info in it. cat the files here:

$ ls -l /sys/module/iwlwifi/parameters/

... to see what your current values are set at. You can install sysfstools and run this for a neat report:

$ systool -vm iwlwifi
Module = "iwlwifi"

  Attributes:
     ...
  Parameters:
    11n_disable         = "0"
    amsdu_size          = "0"
    bt_coex_active      = "Y"
    disable_11ac        = "N"
    disable_11ax        = "N"
    disable_11be        = "N"
    enable_ini          = "16"
    fw_restart          = "Y"
    led_mode            = "0"
    nvm_file            = "(null)"
    power_level         = "0"
    power_save          = "N"
    remove_when_gone    = "N"
    swcrypto            = "0"
    uapsd_disable       = "3"