scheep

sorry about spamming your feeds with 17 cross-posts. that was not right and I won't do it again, I promise!

I would just like your feedback and opinion, good or bad, on the PC components I have on a project I've made called "bestof". I've worked on it for quite some time, and after some recent changes to improve the PC builds section I think it is ready to be shown off.

a few notes:

• only recommending CPUs that aren't on dead platforms for upgradeability reasons. however, if you are on a budget, I have mentioned the 5600, 12100F, 12400F, and the 5700X3D as solid options
• PC cases are almost 100% subject to personal preference, I just suggested a few popular options as well as some good cheap ones
• I did not recommend the RTX 4090 as most people don't need it unless they have money to burn. Both AMD and Nvidia GPUs have been mentioned

If you have any questions or think any of my picks are wrong (which many of them probably are) then please lmk!

https://swarbler.github.io/bestof/tech/pc-builds/pc-builds

Barrel jacks were awesome, they could go in any orientation. The only downside was the many different forms of barrel jack and lack of a standard. My question is: why isn't there a cylindrical USB port? You would be able to rotate it any way you want within 360 degrees!

As a matter of fact, why isn't there a cylindrical power plug? You'd get the benefits of a recessed plug like Type-C (EU) and Type-F (Schuko), you'd get the benefits of reversible plugs like Type-A (North American) and more so as you get 360-degree rotation, and it would be MUCH harder to break/bend compared to two flimsy pins (the UK plug has three thicker pins, but a chunky cylinder would be much more difficult to bend than the pins)

If it was a hollow cylinder (a bit like a vacuum-insulated water bottle), you could feasibly fit some small electronics in it, so things like flush low-power USB chargers and smart home sensors could be made.

The contacts would likely need to be outside the cylinder, similar to the "neutral" pins on Schuko plugs. There would likely need to be some plastic tabs to keep the power bits from touching the non-power bits, and then the socket itself would be able to freely rotate.

Actually, why don't regular sockets freely rotate? Then it would solve all the issues of non-reversible plugs not able to go upside down and reversible plugs not able to go sideways.

Speaking of cylindrical objects, what happened to camcorders? They sound like the most comfortable and easiest way to record videos, with straps and everything. They were compact, portable, and wasn't heavy as all heck.

this is my rant about cylinders, thank you for your time.

edit 2: Okay, I've made a few changes.

First, the printer's MSRPs are listed, making it easier to compare the printers. Voron has been added to the top of the subjective ranking, I left it out completely beforehand.

Qidi has been added, they are very good actually! The SV06 ACE has been added as well as the "Plus" variant, and the SV08 is corrected as a voron CoreXY kit rather than a prusa clone. I've also added the Prusa Mini+, but with a note saying that Sovol, Qidi, etc. have better value printers. I've also got BoxTurtle as an alternative to ERCF.

If you have any other suggestions, please lmk!

edit: really sorry for cross-posting the same thing 17 times, I won't do it again. I just wanted to share a cool project I made, but I should not have done what I did. Sorry for spamming your feeds. whoops!

I would like some feedback on bestof. Mostly relating to the 3D printing section as this is a 3D printing community, but also the site in general.

What things are missing or should be changed? How can I improve bestof?

After some comments in other communities, I've decided to start working on a better colour palette for higher contrast as well as adding more details to WHY I recommend the "best" things. A lot of categories don't neccesarily have a "best" (such as software) and I definitely need to improve on that front. I might even add a "reviews" section for more in-depth information about each thing.

I would really appreciate any feedback you have, and I'm really sorry about the spam! Promise I won't do it again!

original post:

This has taken quite a long time for me to make and now I can finally show everyone! Please lmk if you have any questions or think my picks should be changed to something else!

https://swarbler.github.io/bestof/workshop/making/3d-printing (3D printers, filament, etc.)