cross-posted from: https://lemmy.world/post/21563379

Hello,

I'm looking for a high resolution image of the PAL cover from the Dreamcast (I believe).

There was this website covergalaxy that used it have in 2382x2382 but all the content seems to be gone. Here's the cache https://ibb.co/nRMhjgw . Internet archive doesn't have it.

Much appreciated!

The most severe restrictions to the general public are imposed within a 20-mile (32 km) radius of the Green Bank Observatory.[5] The Observatory polices the area actively for devices emitting excessive electromagnetic radiation such as microwave ovens, Wi-Fi access points and faulty electrical equipment and request citizens discontinue their usage. It does not have enforcement power[6] (although the FCC can impose a fine of $50 on violators[7]), but will work with residents to find solutions.

As a middle ground, we could implement a solution for the bottom tier: small to medium sites and blogs. These sites don’t necessarily need a full-fledged MySQL database.

SQLite seems to be the perfect fit:

• It is the most widely used database worldwide
• It is cross-platform and can run on any device
• It is included by default on all PHP installations (unless explicitly disabled)
• WordPress’s minimum requirements would be a simple PHP server, without the need for a separate database server.
• SQLite support enables lower hosting costs, decreases energy consumption, and lowers performance costs on lower-end servers.

What would the benefits of SQLite be?

Officially supporting SQLite in WordPress could have many benefits. Some notable ones would include:

• Increased performance on lower-end servers and environments.
• Potential for WordPress growth in markets where we did not have access due to the system’s requirements.
• Potential for growth in the hosting market using installation “scenarios”.
• Reduced energy consumption – increased sustainability for the WordPress project.
• Further WordPress’s mission to “democratize publishing” for everyone.
• Easier to contribute to WordPress – download the files and run the built-in PHP server without any other setup required.
• Easier to use automated tests suite.
• Sites can be “portable” and self-contained.

Source and other links:

• https://make.wordpress.org/core/2022/09/12/lets-make-wordpress-officially-support-sqlite/
• https://make.wordpress.org/performance/roadmap-2023/#category-database-optimization
• https://wordpress.org/plugins/sqlite-database-integration/

New GNOME dialog on the right:

Apple's dialog:

They say GNOME isn't a copy of macOS but with time it has been getting really close. I don't think this is a bad thing however they should just admit it and then put some real effort into cloning macOS instead of the crap they're making right now.

Here's the thing: Apple's design you'll find that they carefully included an extra margin between the "Don't Save" and "Cancel" buttons. This avoid accidental clicks on the wrong button so that people don't lose their work when they just want to click "Cancel".

So much for the GNOME, vision and their expert usability team :P

cross-posted from: https://lemmy.world/post/14398634

Unfortunately I was proven to be right about Riley Testut. He's yet another greedy person barely batter than Apple. After bitching to Apple to remove GBA4iOS from the App Store he's now leveraging Delta to force people into his AltStore.

Delta has finally made its way to the App Store. Additionally, the Delta developer has also published their alternative marketplace, AltStore, in the EU today.

If you're in the EU you'll only be able to get Delta on the AltStore and that requires:

This is complete bullshit he could've just launched Delta on the App Store in Europe as well but he decided not to.

Thanks Riley Testut for being a dick to the people that actually forced Apple into allowing alternative app stores in the first place.

---

Github issue related to this dick move: https://github.com/rileytestut/Delta/issues/292

cross-posted from: https://lemmy.world/post/14398634

Unfortunately I was proven to be right about Riley Testut. He's yet another greedy person barely batter than Apple. After bitching to Apple to remove GBA4iOS from the App Store he's now leveraging Delta to force people into his AltStore.

Delta has finally made its way to the App Store. Additionally, the Delta developer has also published their alternative marketplace, AltStore, in the EU today.

If you're in the EU you'll only be able to get Delta on the AltStore and that requires:

This is complete bullshit he could've just launched Delta on the App Store in Europe as well but he decided not to.

Thanks Riley Testut for being a dick to the people that actually forced Apple into allowing alternative app stores in the first place.

---

Github issue related to this dick move: https://github.com/rileytestut/Delta/issues/292

Here's my take:

The domain aftermarket has a big problem... it exists. This market shouldn't ever be allowed to exist in the first place. ICANN should've blocked this bullshit a long time ago and forced registrars to just let domains expire and free the space. Also add a few provisions about unused domain names and about selling them.

Hello,

So I have a Motorola SM56 USB Data Fax Modem (aka Apple USB Modem for some people) and according to information online this modem supports V.92, Caller ID, wake-on-ring and most importantly telephone answering (V.253).

At a place I happen to have an old telephone analog line that gets calls and unfortunately I can't get rid of. Any ideias / links / software on how can I use the modem + a low end box / ARM SBC to "digitize" the phone line into a generic SIP / VOIP that I can then connect to using MicroSIP on another computer?

Thank you.

Update on this:

I just tried the modem under Windows with a few programs such as Phone Dialer Pro and the built in dialer.exe and while the modem can detect incoming phone calls and place calls I can't pass the audio back to the operating system / phone software.

I did some research about the SM65 and it seems like it was designed to have an headset directly attached to it like on those PCI cards that also use it:

The built in COM port of the modems seems to be only usable to control the modem via AT commands and can't be used to pass audio form and to the system.

Hello,

My IoT/Home Automation needs are centered around custom built ESPHome devices and I currently have them all connected to a HA instance and things work fine.

Now, I like HA's interface and all the sugar candy, however I don't like the massive amounts of resources it requires and the fact that the storage usage keeps growing and it is essentially a huge, albeit successful, docker clusterfuck.

Is there any alternative dashboard that just does this:

1. Specifically made for ESPHome devices - no other devices required;
2. Single daemon or something PHP/Python/Node that you can setup manually with a few systemd units;
3. Connects to the ESPHome devices, logs the data and shows a dashboard with it;
4. Runs offline, doesn't go into 24234 GitHub repositories all the time and whatnot.

Obviously that I'm expecting more manual configuration, I'm okay with having to edit a config file somewhere to add a device, change the dashboard layout etc. I also don't need the ESPHome part that builds and deploys configurations to devices as I can do that locally on my computer.

Thank you.

cross-posted from: https://lemmy.world/post/11162262

Hey,

For all of you that are running proper setups and use nftables to protect your servers be aware that pvxe/nftables-geoip now has the ability to generate IP lists by country.

This can be used to, for instance, drop all traffic from specific countries or the opposite, drop everything except for your own country.

https://github.com/pvxe/nftables-geoip/commit/c137151ebc05f4562c56e6802761e0a93ed107a2

Here's how you can block / track traffic from certain countries:

• https://wiki.nftables.org/wiki-nftables/index.php/GeoIP_matching
• https://www.mybluelinux.com/nftables-and-geoip

Previously you had to load the entire geoip DB containing multiple GB and would end up using a LOT of RAM. Those guides aren't yet updated to use the country specific files but it's just about changing the include line to whatever you've generated with pvxe/nftables-geoip.

Hey,

For all of you that are running proper setups and use nftables to protect your servers be aware that pvxe/nftables-geoip now has the ability to generate IP lists by country.

This can be used to, for instance, drop all traffic from specific countries or the opposite, drop everything except for your own country.

https://github.com/pvxe/nftables-geoip/commit/c137151ebc05f4562c56e6802761e0a93ed107a2

Here's how you can block / track traffic from certain countries:

• https://wiki.nftables.org/wiki-nftables/index.php/GeoIP_matching
• https://www.mybluelinux.com/nftables-and-geoip

Previously you had to load the entire geoip DB containing multiple GB and would end up using a LOT of RAM. Those guides aren't yet updated to use the country specific files but it's just about changing the include line to whatever you've generated with pvxe/nftables-geoip.

cross-posted from: https://lemmy.world/post/8834324

I'm looking for an application (windows or maybe web) that can be used to combine images vertically and horizontally. I usually go with PhotoScape (screenshot) to for this but that's not free nor updated anymore. Important features for me are to be able to combine horizontally or vertically, set the number or rows or columns and have the ability to resize the final image.

Thank you.