Asklemmy

Electronics / microcontrollers.

Took just a few months to go from, "I can make a wifi connected weather station for like $20 in components!?" to "oscilloscopes cost how much?"

Self-hosting apps / homelab

Getting used enterprise gear is not prohibitively expensive, but the electric bills balloon very quickly.

Coffee.

I blame James Hoffman entirely.

Within a year I went from:

Drinking instant coffee at home, but really enjoying "proper coffee"

To

Buying a cafetiere (~£15) + preground coffee

To

Buying a Nespresso (~£60 on offer) + pods

To

Buying a budget espresso machine (~£120) + preground coffee

To

Wasting my money on a cheap manual coffee grinder (~£50) + beans

To

Immediately replacing it with an entry level Sage grinder (~£170)

To

Buying an entry Level "proper" espresso machine (~£700)

It took me a good 2-3 weeks of practicing and dialling in before pulling a good shot of coffee that I'd actually want to drink, but by that point it was also about learning a new skill, learning how different aspects of the process affect the end result and learning how to make all sorts of different espresso-based drinks.

My girlfriend thought I was nuts at first, but a year or so later even she agrees it was worth the investment. I still for the life of me can't get the hang of latte art though.

The problem is now though that I'm a waaaay more critical of coffee from coffee shops, because I spent a long time making bad coffee whilst learning!

Knitting. Super cheap to start, you can pick up a set of needles and some acrylic yarn for under $20. But when you start getting into nice yarns and bigger pieces, you are spending hundreds of dollars on yarn alone for a blanket or a sweater. And you want nice needles in all sizes as well as all types (double pointed, regular and circular)… more hundreds of dollars.

Moral of the story is if a friend knits you something with nice yarn, please appreciate it. Lots of effort and thought went into it.

Growing cannabis (legal here in Canada)

…anyone can grow weed. Growing GOOD weed is an art.

I bought myself a raspberry pi for my birthday a few years ago.

I now have thousands of dollars in hardware sitting in a server rack in my office. Whoops.

For me it is maybe camping.

I just tested my new sleeping bag - under 0.5kg rated to -5°C. And realised that I bought/ replaced lots of gear to higher quality gear over few years.

Board games. Things get expensive once you start collecting

Running.

Was supposed to be the cheapest way to get exercise. You can do it right from your front door, no gym subscriptions, no specialized equipment (some people will tell you you don't even need shoes), and it's far and away the best time-value exercise I've ever found. You can get away with like 20 minutes 3-4 times a week and be doing great.

Well, turns out I love running and I love distance running so I'm now putting up enough miles to need new shoes 2-3 times a year, a nice Garmin smart watch and heart rate monitor to track my progress, sign-ups for several long-distance races each year, shorts, socks, you get the picture.

Could I do it cheaper? Yeah. But at the end of the day it's a hobby and I like it

This is not the first post where I feel it but I love it so much that we have a lot of people on Lemmy that can talk about things not related to computers!

I needed a new saucepan.

I've now replaced half my kitchen.

Watercolor.

Children play with $5 palettes. Apparently I pay $20 for a single color tube.

Gardening.

Containers are surprisingly expensive. And you need a lot of soil to fill them, which gets expensive too. Then it's impossible to only buy the seeds you need, when there are so many cool varieties...

Coffee. I'm in a coffee producing country. It could be as cheap as grabbing a bag from the coffee institute (really good and cheap), a cloth filter and call it a day. Instead, I'm on my second espresso machine, fourth grinder, second portafilter set, and have all the doodads to make it just how I like it.

Mechanical pencils. You can go from $6 Kuru Toga Advances to $60 rOtring 800s to $100+ imported Japan region exclusive Kuru Toga Dives

3D printing. Purchased a cheap 3D printer to save money printing things instead of buying things. 5 printer print farm later, no idea why I'm doing this to myself.

It’s a toss up between cooking and home networking for me.

Cooking because it started off as just finding neat recipes and giving them a shot to now experimenting with new techniques and harder to procure ingredients. My pantry looks like a mini spice market and keeping them fresh is its own hassle. Plus needing all the gear gets expensive!

I also got really into home networking during the start of the pandemic. I went from having a simple off the shelf mesh network to a full network rack in my basement serving some high end access points and cat6 drops in every room. Now I have a pretty secure iot stack that’s separate from my main vlan and one devoted to my work computer.

Playing music. Started on a shitty hand-me-down acoustic guitar. Got a better guitar. Got an electric. Got a better amp. Got a couple of pedals. Got a better amp. Got like 6 more amps, some cabs, 5 more guitars, a huge pedalboard, a cello, a keyboard, an audio interface, attenuators, mics, etc etc.

You gotta understand... I need all this stuff. There are subtle differences that you've never noticed before but will probably hear once I do an a/b comparison for you, and I absolutely must get an AC15 next to round out the collection instead of buckling down and recording something.

Mechanical keyboards. The next one is my endgame, I swear. Just one more groupbuy for those keycaps. It never truly ends.

Reading. Bear with me…you start by getting a cheap physical or digital copy of the book. Then you fall in love with the book/author. Then you have to buy all the books by that author…but not the cheap editions…the fancy editions! You need to display these babies! And oh! They sell cool collectors items that would be perfect for the book shelf! Rinse and repeat for so…so many books. Sigh.

3d printing. I started out with a cheapish Chinese model, got annoyed by the lack of accuracy and bought a Prusa.
Then there’s the filaments, accessories, post processing stuff... I own a Dremel now for some reason!
And I’m constantly eyeing those resin 3d printers, telling myself the higher resolution is totally worth it…
The only thing saving my bank account is my low attention span and dozens of other interests :)

Motorcycle riding, done the right way.

Bought a decent street bike to start on, learn the ropes for several years, had the occasional mishhap or two which I fixed by myself. Still, cost money to fix things right?

Upgraded to a proper sport bike and realized how much fun it is, also with a new level of danger involved. Still, I wasn't an idiot into things right. Bought 100% proper gear, including a track suit, good helmet, gloves, etc. as any motorcyclist knows, you'll eventually drop your bike, which I did. Again, fixing it yourself is certainly an option, but also again, it cost money.

Then, I made the mistake of going to my first track day. They will allow you to use your own motorcycle as long as you prep it correctly and have decent tires and safety gear. This was an absolute game changer, and I was hooked harder than a heroin addict with an unlimited bank account. Unfortunately, I am neither of those two categories, and track days only get more expensive the deeper you get into them. First of all, they are not cheap to begin with. A decent track day will set you back 300 to $500 just to get on the track. Then, to really get the most out of it, you should have true racing tires with tire warmers. Then there's the matter of getting your bike to the track, race fuel, a place to hang out, etc etc etc. The list goes on and on.

Surprised there’s no reef tank people here. Imagine spending $5000 on a 20 gallon fish tank - BEFORE spending any money on corals.

Ya it CAN be done for $50, but nobody does that.

Tinkering with electronics. Like, breadboards, integrated circuits, transistors, microcontrollers.

I've got a tacklebox full to bursting with components and parts worth probably close to a grand.

I have autism and ADHD, so all of them:

• Cycling
• Bicycle touring
• Skateboarding
• Vert Skateboarding
• Freestyle Skateboarding
• Retro Video Gaming
• Drawing
• Reading
• Programming and Raspberry Pi's

That's only my 30's which is the last 4 years. Hobbies for me are normally short and fierce obsessions when I start, they eventually slow down into a more 'normal' pasttime that I do sometimes to past the time.