3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or [email protected]
There are CAD communities available at: [email protected] or [email protected]
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
Sorry for the delay. Yes, I did design it myself. I made a small post about it here that includes some frequency response curves. It sounds much better than the sun of its parts, which weren't that intentionally chosen, but it also makes it obvious how much DSP modern wireless speakers have - especially in the bottom octive. I personally like making things vs buying, so this is right up my alley. I will (eventually) get around to making an updated design with better components, but it's doing just fine so far.
The print itself have proven to be very resilient. It's been knocked off a counter and fallen to the floor more than once. It also frequently serves as a step stool.
Printed enclosures have a bad rap for not being "dead", but the rounded design without large flat surfaces is pretty dead. Yeah, the top and bottom aren't flat but they're not a uniform thickness to give them a bit more strength. The walls are "only" two perimeters, but the extrusion width was something like 0.8mm on a 0.6mm nozzle. I think the print has ~18% infill but it's been a while now.
Let me know if you would like any more information!
Awesome, thanks for the reply. I've been curious about printing speakers myself, but it seems like a daunting task.
No problem! If you're already designing speakers, printing vs making them out of something else will come down to your CAD skills/speed vs how long it would take you to make a finished enclosure out of a different material like wood.
I wouldn't call anything about the process hard, but it can be a bit time consuming if you're not a CAD ninja already. Either way, doing this will probably improve your CAD skills.
If you've never designed a speaker before, you could purchase a kit for one of the many DIY speakers out there and print the enclosure. My first DIY bluetooth speaker was an Overnight Sensation MTM stuffed in a very undersized, and ported, wood enclosure with a built in bluetooth board, basic BMS, and amplifier. Parts-Express, Madisound, and a number of players make getting a complete DIY kit easy.